Package: src:linux
Version: 4.1.6-1
Severity: normal
Dear Maintainer,
Sometimes my UPS (Advice) starts beeping every 20 seconds or so (electricity is
not turned off and the computer continues to work).
To stop beeping I reboot.
Motherboard: Gigabyte H67A-UD3H
Here is the last part of dmesg output:
[80956.127530] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81253.729422] usb 3-1.6: USB disconnect, device number 8
[81254.017093] usb 3-1.6: new low-speed USB device number 9 using ehci-pci
[81254.115853] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[81254.115858] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81254.115860] usb 3-1.6: Product: USB Keyboard
[81254.115863] usb 3-1.6: Manufacturer: SIGMACHIP
[81254.119278] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0009/input/input24
[81254.173723] hid-generic 0003:1C4F:0016.0009: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[81264.187547] hid-generic 0003:1C4F:0016.000A: usb_submit_urb(ctrl) failed: -1
[81264.187575] hid-generic 0003:1C4F:0016.000A: timeout initializing reports
[81264.187882] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000A/input/input25
[81264.243689] hid-generic 0003:1C4F:0016.000A: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[81392.081168] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81541.396630] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82745.525980] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82798.635872] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83497.118588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83652.450465] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83968.129094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[86329.325986] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87405.188725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87676.430232] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[87676.430241] usb 3-1.6: USB disconnect, device number 9
[87676.721746] usb 3-1.6: new low-speed USB device number 10 using ehci-pci
[87676.820299] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[87676.820303] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[87676.820306] usb 3-1.6: Product: USB Keyboard
[87676.820308] usb 3-1.6: Manufacturer: SIGMACHIP
[87676.823925] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.000B/input/input26
[87676.878292] hid-generic 0003:1C4F:0016.000B: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[87686.892065] hid-generic 0003:1C4F:0016.000C: usb_submit_urb(ctrl) failed: -1
[87686.892072] hid-generic 0003:1C4F:0016.000C: timeout initializing reports
[87686.892171] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000C/input/input27
[87686.948039] hid-generic 0003:1C4F:0016.000C: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
-- Package-specific info:
** Version:
Linux version 4.1.0-2-686-pae (debian...@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-2-686-pae root=UUID=54902130-d49b-4173-bb4f-5eacb0595474 ro selinux=1 security=selinux quiet
** Not tainted
** Kernel log:
[54645.278337] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[56091.403730] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59230.781944] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59409.777609] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[59594.555331] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59647.665273] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[60290.654916] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[61341.896171] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[61413.046912] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[63665.797488] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65027.453488] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65629.750036] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65736.971042] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[66422.539491] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[66938.640360] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[67081.951387] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[67587.192184] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[67587.192193] usb 3-1.6: USB disconnect, device number 6
[67587.497466] usb 3-1.6: new low-speed USB device number 7 using ehci-pci
[67587.595870] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[67587.595875] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[67587.595878] usb 3-1.6: Product: USB Keyboard
[67587.595880] usb 3-1.6: Manufacturer: SIGMACHIP
[67587.599509] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0005/input/input20
[67587.654034] hid-generic 0003:1C4F:0016.0005: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[67597.667837] hid-generic 0003:1C4F:0016.0006: usb_submit_urb(ctrl) failed: -1
[67597.667853] hid-generic 0003:1C4F:0016.0006: timeout initializing reports
[67597.668040] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.0006/input/input21
[67597.724025] hid-generic 0003:1C4F:0016.0006: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[67940.287915] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68530.367569] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68553.411638] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68752.840720] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68874.105102] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[69476.417693] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[71490.079320] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[72196.616998] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73288.522012] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73628.253946] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73811.644725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[74103.261774] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[74744.248329] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76684.900640] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76778.093995] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76915.384905] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78319.387693] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78362.475588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78846.496094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[79400.690143] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[79603.844507] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[80600.512569] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[80600.512578] usb 3-1.6: USB disconnect, device number 7
[80600.797419] usb 3-1.6: new low-speed USB device number 8 using ehci-pci
[80600.896503] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[80600.896508] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80600.896510] usb 3-1.6: Product: USB Keyboard
[80600.896513] usb 3-1.6: Manufacturer: SIGMACHIP
[80600.900268] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0007/input/input22
[80600.954320] hid-generic 0003:1C4F:0016.0007: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[80610.967774] hid-generic 0003:1C4F:0016.0008: usb_submit_urb(ctrl) failed: -1
[80610.967796] hid-generic 0003:1C4F:0016.0008: timeout initializing reports
[80610.968015] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.0008/input/input23
[80611.023992] hid-generic 0003:1C4F:0016.0008: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[80692.952254] Process accounting resumed
[80956.127530] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81253.729422] usb 3-1.6: USB disconnect, device number 8
[81254.017093] usb 3-1.6: new low-speed USB device number 9 using ehci-pci
[81254.115853] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[81254.115858] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81254.115860] usb 3-1.6: Product: USB Keyboard
[81254.115863] usb 3-1.6: Manufacturer: SIGMACHIP
[81254.119278] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0009/input/input24
[81254.173723] hid-generic 0003:1C4F:0016.0009: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[81264.187547] hid-generic 0003:1C4F:0016.000A: usb_submit_urb(ctrl) failed: -1
[81264.187575] hid-generic 0003:1C4F:0016.000A: timeout initializing reports
[81264.187882] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000A/input/input25
[81264.243689] hid-generic 0003:1C4F:0016.000A: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[81392.081168] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81541.396630] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82745.525980] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82798.635872] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83497.118588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83652.450465] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83968.129094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[86329.325986] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87405.188725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87676.430232] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[87676.430241] usb 3-1.6: USB disconnect, device number 9
[87676.721746] usb 3-1.6: new low-speed USB device number 10 using ehci-pci
[87676.820299] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[87676.820303] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[87676.820306] usb 3-1.6: Product: USB Keyboard
[87676.820308] usb 3-1.6: Manufacturer: SIGMACHIP
[87676.823925] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.000B/input/input26
[87676.878292] hid-generic 0003:1C4F:0016.000B: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[87686.892065] hid-generic 0003:1C4F:0016.000C: usb_submit_urb(ctrl) failed: -1
[87686.892072] hid-generic 0003:1C4F:0016.000C: timeout initializing reports
[87686.892171] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000C/input/input27
[87686.948039] hid-generic 0003:1C4F:0016.000C: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[87778.972093] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
** Model information
not available
** Loaded modules:
usblp
fuse
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
snd_hda_codec_hdmi
binfmt_misc
snd_hda_codec_realtek
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
kvm_intel
kvm
iTCO_wdt
iTCO_vendor_support
crc32_pclmul
nouveau
joydev
gspca_t613
gspca_main
videodev
media
aesni_intel
mxm_wmi
snd_hda_intel
wmi
snd_hda_controller
aes_i586
video
snd_hda_codec
evdev
ttm
snd_hda_core
xts
drm_kms_helper
snd_hwdep
lrw
snd_pcm_oss
gf128mul
drm
snd_mixer_oss
ablk_helper
snd_pcm
snd_timer
serio_raw
cryptd
pcspkr
i2c_algo_bit
snd
i2c_i801
sg
soundcore
mei_me
lpc_ich
shpchp
mei
mfd_core
8250_fintek
processor
button
thermal_sys
coretemp
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
hid_generic
usbhid
hid
xhci_pci
ehci_pci
crc32c_intel
xhci_hcd
ahci
ehci_hcd
libahci
firewire_ohci
firewire_core
libata
crc_itu_t
r8169
mii
scsi_mod
usbcore
usb_common
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f9000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family High Definition Audio Controller [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cf800000-cf9fffff
Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fbc00000-fbcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd H67 Express Chipset Family LPC Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family SATA AHCI Controller [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=32]
Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:066d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: NVIDIA Corporation G98 [GeForce 8400GS] [10de:066d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 10) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
06:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd uPD720200 USB 3.0 Host Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 010: ID 1c4f:0016 SiGma Micro
Bus 003 Device 005: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 003 Device 004: ID 17a1:0128
Bus 003 Device 003: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.1.0-2-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.1.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.123
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.1.0-2-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
ii libc6-i686 2.22-5
Versions of packages linux-image-4.1.0-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-11
ii grub-pc 2.02~beta2-36
pn linux-doc-4.1 <none>
Versions of packages linux-image-4.1.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
ii firmware-ivtv 20160110-1
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn xen-hypervisor <none>
-- debconf information excluded
Version: 4.1.6-1
Severity: normal
Dear Maintainer,
Sometimes my UPS (Advice) starts beeping every 20 seconds or so (electricity is
not turned off and the computer continues to work).
To stop beeping I reboot.
Motherboard: Gigabyte H67A-UD3H
Here is the last part of dmesg output:
[80956.127530] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81253.729422] usb 3-1.6: USB disconnect, device number 8
[81254.017093] usb 3-1.6: new low-speed USB device number 9 using ehci-pci
[81254.115853] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[81254.115858] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81254.115860] usb 3-1.6: Product: USB Keyboard
[81254.115863] usb 3-1.6: Manufacturer: SIGMACHIP
[81254.119278] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0009/input/input24
[81254.173723] hid-generic 0003:1C4F:0016.0009: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[81264.187547] hid-generic 0003:1C4F:0016.000A: usb_submit_urb(ctrl) failed: -1
[81264.187575] hid-generic 0003:1C4F:0016.000A: timeout initializing reports
[81264.187882] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000A/input/input25
[81264.243689] hid-generic 0003:1C4F:0016.000A: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[81392.081168] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81541.396630] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82745.525980] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82798.635872] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83497.118588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83652.450465] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83968.129094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[86329.325986] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87405.188725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87676.430232] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[87676.430241] usb 3-1.6: USB disconnect, device number 9
[87676.721746] usb 3-1.6: new low-speed USB device number 10 using ehci-pci
[87676.820299] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[87676.820303] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[87676.820306] usb 3-1.6: Product: USB Keyboard
[87676.820308] usb 3-1.6: Manufacturer: SIGMACHIP
[87676.823925] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.000B/input/input26
[87676.878292] hid-generic 0003:1C4F:0016.000B: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[87686.892065] hid-generic 0003:1C4F:0016.000C: usb_submit_urb(ctrl) failed: -1
[87686.892072] hid-generic 0003:1C4F:0016.000C: timeout initializing reports
[87686.892171] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000C/input/input27
[87686.948039] hid-generic 0003:1C4F:0016.000C: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
-- Package-specific info:
** Version:
Linux version 4.1.0-2-686-pae (debian...@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-2-686-pae root=UUID=54902130-d49b-4173-bb4f-5eacb0595474 ro selinux=1 security=selinux quiet
** Not tainted
** Kernel log:
[54645.278337] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[56091.403730] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59230.781944] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59409.777609] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[59594.555331] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[59647.665273] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[60290.654916] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[61341.896171] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[61413.046912] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[63665.797488] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65027.453488] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65629.750036] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[65736.971042] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[66422.539491] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[66938.640360] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[67081.951387] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[67587.192184] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[67587.192193] usb 3-1.6: USB disconnect, device number 6
[67587.497466] usb 3-1.6: new low-speed USB device number 7 using ehci-pci
[67587.595870] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[67587.595875] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[67587.595878] usb 3-1.6: Product: USB Keyboard
[67587.595880] usb 3-1.6: Manufacturer: SIGMACHIP
[67587.599509] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0005/input/input20
[67587.654034] hid-generic 0003:1C4F:0016.0005: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[67597.667837] hid-generic 0003:1C4F:0016.0006: usb_submit_urb(ctrl) failed: -1
[67597.667853] hid-generic 0003:1C4F:0016.0006: timeout initializing reports
[67597.668040] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.0006/input/input21
[67597.724025] hid-generic 0003:1C4F:0016.0006: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[67940.287915] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68530.367569] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68553.411638] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68752.840720] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[68874.105102] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[69476.417693] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[71490.079320] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[72196.616998] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73288.522012] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73628.253946] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[73811.644725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[74103.261774] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[74744.248329] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76684.900640] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76778.093995] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[76915.384905] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78319.387693] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78362.475588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[78846.496094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[79400.690143] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[79603.844507] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[80600.512569] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[80600.512578] usb 3-1.6: USB disconnect, device number 7
[80600.797419] usb 3-1.6: new low-speed USB device number 8 using ehci-pci
[80600.896503] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[80600.896508] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80600.896510] usb 3-1.6: Product: USB Keyboard
[80600.896513] usb 3-1.6: Manufacturer: SIGMACHIP
[80600.900268] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0007/input/input22
[80600.954320] hid-generic 0003:1C4F:0016.0007: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[80610.967774] hid-generic 0003:1C4F:0016.0008: usb_submit_urb(ctrl) failed: -1
[80610.967796] hid-generic 0003:1C4F:0016.0008: timeout initializing reports
[80610.968015] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.0008/input/input23
[80611.023992] hid-generic 0003:1C4F:0016.0008: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[80692.952254] Process accounting resumed
[80956.127530] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81253.729422] usb 3-1.6: USB disconnect, device number 8
[81254.017093] usb 3-1.6: new low-speed USB device number 9 using ehci-pci
[81254.115853] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[81254.115858] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81254.115860] usb 3-1.6: Product: USB Keyboard
[81254.115863] usb 3-1.6: Manufacturer: SIGMACHIP
[81254.119278] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.0009/input/input24
[81254.173723] hid-generic 0003:1C4F:0016.0009: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[81264.187547] hid-generic 0003:1C4F:0016.000A: usb_submit_urb(ctrl) failed: -1
[81264.187575] hid-generic 0003:1C4F:0016.000A: timeout initializing reports
[81264.187882] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000A/input/input25
[81264.243689] hid-generic 0003:1C4F:0016.000A: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[81392.081168] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[81541.396630] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82745.525980] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[82798.635872] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83497.118588] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83652.450465] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[83968.129094] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[86329.325986] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87405.188725] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
[87676.430232] usb 3-1-port6: disabled by hub (EMI?), re-enabling...
[87676.430241] usb 3-1.6: USB disconnect, device number 9
[87676.721746] usb 3-1.6: new low-speed USB device number 10 using ehci-pci
[87676.820299] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[87676.820303] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[87676.820306] usb 3-1.6: Product: USB Keyboard
[87676.820308] usb 3-1.6: Manufacturer: SIGMACHIP
[87676.823925] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:1C4F:0016.000B/input/input26
[87676.878292] hid-generic 0003:1C4F:0016.000B: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[87686.892065] hid-generic 0003:1C4F:0016.000C: usb_submit_urb(ctrl) failed: -1
[87686.892072] hid-generic 0003:1C4F:0016.000C: timeout initializing reports
[87686.892171] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.1/0003:1C4F:0016.000C/input/input27
[87686.948039] hid-generic 0003:1C4F:0016.000C: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[87778.972093] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
** Model information
not available
** Loaded modules:
usblp
fuse
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
snd_hda_codec_hdmi
binfmt_misc
snd_hda_codec_realtek
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
kvm_intel
kvm
iTCO_wdt
iTCO_vendor_support
crc32_pclmul
nouveau
joydev
gspca_t613
gspca_main
videodev
media
aesni_intel
mxm_wmi
snd_hda_intel
wmi
snd_hda_controller
aes_i586
video
snd_hda_codec
evdev
ttm
snd_hda_core
xts
drm_kms_helper
snd_hwdep
lrw
snd_pcm_oss
gf128mul
drm
snd_mixer_oss
ablk_helper
snd_pcm
snd_timer
serio_raw
cryptd
pcspkr
i2c_algo_bit
snd
i2c_i801
sg
soundcore
mei_me
lpc_ich
shpchp
mei
mfd_core
8250_fintek
processor
button
thermal_sys
coretemp
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
hid_generic
usbhid
hid
xhci_pci
ehci_pci
crc32c_intel
xhci_hcd
ahci
ehci_hcd
libahci
firewire_ohci
firewire_core
libata
crc_itu_t
r8169
mii
scsi_mod
usbcore
usb_common
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f9000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family High Definition Audio Controller [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cf800000-cf9fffff
Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fbc00000-fbcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd H67 Express Chipset Family LPC Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family SATA AHCI Controller [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=32]
Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:066d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: NVIDIA Corporation G98 [GeForce 8400GS] [10de:066d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 10) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
06:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd uPD720200 USB 3.0 Host Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 010: ID 1c4f:0016 SiGma Micro
Bus 003 Device 005: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 003 Device 004: ID 17a1:0128
Bus 003 Device 003: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.1.0-2-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.1.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.123
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.1.0-2-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
ii libc6-i686 2.22-5
Versions of packages linux-image-4.1.0-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-11
ii grub-pc 2.02~beta2-36
pn linux-doc-4.1 <none>
Versions of packages linux-image-4.1.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
ii firmware-ivtv 20160110-1
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn xen-hypervisor <none>
-- debconf information excluded
/image%2F3138905%2F20190112%2Fob_6a84af_4.jpg "Sigmachip")
Sigmachip Usb Keyboard Driver Download
Sigmachip Usb Keyboard Driver
Sigmachip USB Camera Driver, Free Download by SigmaChip. Alge-Timing Timy USB Driver ensures the correct functionality of Timy devices. I am using Linux Mint 18.2 fresh install, with the latest 4.13.0-17-generic kernel. I tried to install the latest LinuxWacom drivers from this page, but the tablet does not work. I saw a mail on this list about working on the support for this tablet. 5K pricing is for budgetary use only, shown in United States dollars. The prices are representative and do not reflect final pricing. Contact your local Microchip sales representative or distributor for volume and / or discount pricing.